TV_ETERNITY, TV_ETERNITY_MS and MAX_DELAY_MS may be configured and
ought to be in defaults.h so that they can be inherited from everywhere
without including time.h and could also be redefined if neede
(particularly for MAX_DELAY_MS).
There's no reason CONFIG_HAP_POOLS and its opposite are located into
pools-t.h, it forces those that depend on them to inlcude the file.
Other similar options are normally dealt with in defaults.h, which is
part of the default API, so let's do that.
As reported in GH issue #1369, there is a single case of #if with a
possibly undefined value in defaults.h which is on MAXHOSTNAMELEN. Let's
turn it to a #ifdef.
Oss-fuzz reports in issue 36328 that we can recurse too far by passing
extremely deep expressions to the ".if" parser. I thought we were still
limited to the 1024 chars per line, that would be highly sufficient, but
we don't have any limit now :-/
Let's just pass a maximum recursion counter to the recursive parsers.
It's decremented for each call and the expression fails if it reaches
zero. On the most complex paths it can add 3 levels per parenthesis,
so with a limit of 1024, that's roughly 343 nested sub-expressions that
are supported in the worst case. That's more than sufficient, for just
a few kB of RAM.
No backport is needed.
This one was deprecated in 2.3 and marked for removal in 2.5. It suffers
too many limitations compared to threads, and prevents some improvements
from being engaged. Instead of a bypassable startup error, there is now
a hard error.
The parsing code was removed, and very few obvious cases were as well.
The code is deeply rooted at certain places (e.g. "for" loops iterating
from 0 to nbproc) so it will not be that trivial to remove everywhere.
The "bind" and "bind-process" parsers will have to be adjusted, though
maybe not completely changed if we later want to support thread groups
for large NUMA machines. Some stats socket restrictions were removed,
and the doc was updated according to what was done. A few places in the
doc still refer to nbproc and will have to be revisited. The master-worker
code also refers to the process number to distinguish between master and
workers and will have to be carefully adjusted. The MAX_PROCS macro was
reset to 1, this will at least reduce the size of some remaining arrays.
Two regtests were dependieng on this directive, one with an explicit
"nbproc 1" and another one testing the master's CLI using nbproc 4.
Both were adapted.
On process startup, the CPU topology of the machine is inspected. If a
multi-socket CPU machine is detected, automatically define the process
affinity on the first node with active cpus. This is done to prevent an
impact on the overall performance of the process in case the topology of
the machine is unknown to the user.
This step is not executed in the following condition :
- a non-null nbthread statement is present
- a restrictive 'cpu-map' statement is present
- the process affinity is already restricted, for example via a taskset
call
For the record, benchmarks were executed on a machine with 2 CPUs
Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz. In both clear and ssl
scenario, the performance were sub-optimal without the automatic
rebinding on a single node.
This is the number of args accepted on a command received on the CLI,
is has long been totally independent of stats and should not carry
this misleading "stats" name anymore.
The recent default runqueue size reduction appeared to have significantly
lowered performance on low-thread count configs. Testing various values
runqueue values on different workloads under thread counts ranging from
1 to 64, it appeared that lower values are more optimal for high thread
counts and conversely. It could even be drawn that the optimal value for
various workloads sits around 280/sqrt(nbthread), and probably has to do
with both the L3 cache usage and how to optimally interlace the threads'
activity to minimize contention. This is much easier to optimally
configure, so let's do this by default now.
The reason is that H2 can already require 32 16kB buffers for the mux
output at once, which will deplete the local cache. Thus it makes sense
to go further to leave some time to other connection to release theirs.
In addition, the L2 cache on modern CPUs is already 1 MB, so this change
is welcome in any case.
The maximum number of connections accepted at once by a thread for a single
listener used to default to 64 divided by the number of processes but the
tasklet-based model is much more scalable and benefits from smaller values.
Experimentation has shown that 4 gives the highest accept rate for all
thread values, and that 3 and 5 come very close, as shown below (HTTP/1
connections forwarded per second at multi-accept 4 and 64):
ac\thr| 1 2 4 8 16
------+------------------------------
4| 80k 106k 168k 270k 336k
64| 63k 89k 145k 230k 274k
Some tests were also conducted on SSL and absolutely no change was observed.
The value was placed into a define because it used to be spread all over the
code.
It might be useful at some point to backport this to 2.3 and 2.2 to help
those who observed some performance regressions from 1.6.
Since a lot of internal callbacks were turned to tasklets, the runqueue
depth had not been readjusted from the default 200 which was initially
used to favor batched processing. But nowadays it appears too large
already based on the following tests conducted on a 8c16t machine with
a simple config involving "balance leastconn" and one server. The setup
always involved the two threads of a same CPU core except for 1 thread,
and the client was running over 1000 concurrent H1 connections. The
number of requests per second is reported for each (runqueue-depth,
nbthread) couple:
rq\thr| 1 2 4 8 16
------+------------------------------
32| 120k 159k 276k 477k 698k
40| 122k 160k 276k 478k 722k
48| 121k 159k 274k 482k 720k
64| 121k 160k 274k 469k 710k
200| 114k 150k 247k 415k 613k <-- default
It's possible to save up to about 18% performance by lowering the
default value to 40. One possible explanation to this is that checking
I/Os more frequently allows to flush buffers faster and to smooth the
I/O wait time over multiple operations instead of alternating phases
of processing, waiting for locks and waiting for new I/Os.
The total round trip time also fell from 1.62ms to 1.40ms on average,
among which at least 0.5ms is attributed to the testing tools since
this is the minimum attainable on the loopback.
After some observation it would be nice to backport this to 2.3 and
2.2 which observe similar improvements, since some users have already
observed some perf regressions between 1.6 and 2.2.
This way we make all xxhash functions inline, with implementations being
directly included within xxhash.h.
Makefile is updated as well, since we don't need to compile and link
xxhash.o anymore.
Inlining should improve performance on small data inputs.
That's already where MAX_PROCS is set, and we already handle the case of
the default value so there is no reason for placing it in thread.h given
that most call places don't need the rest of the threads definitions. The
include was removed from global-t.h and activity.c.
The current state of the logging is a real mess. The main problem is
that almost all files include log.h just in order to have access to
the alert/warning functions like ha_alert() etc, and don't care about
logs. But log.h also deals with real logging as well as log-format and
depends on stream.h and various other things. As such it forces a few
heavy files like stream.h to be loaded early and to hide missing
dependencies depending where it's loaded. Among the missing ones is
syslog.h which was often automatically included resulting in no less
than 3 users missing it.
Among 76 users, only 5 could be removed, and probably 70 don't need the
full set of dependencies.
A good approach would consist in splitting that file in 3 parts:
- one for error output ("errors" ?).
- one for log_format processing
- and one for actual logging.
The STATS_DEFAULT_REALM and STATS_DEFAULT_URI were moved to defaults.h.
It was required to include types/pattern.h and types/sample.h since they
are mentioned in function prototypes.
It would be wise to merge this with uri_auth.h later.
A few includes were missing in each file. A definition of
struct polled_mask was moved to fd-t.h. The MAX_POLLERS macro was
moved to defaults.h
Stdio used to be silently inherited from whatever path but it's needed
for list_pollers() which takes a FILE* and which can thus not be
forward-declared.
The files are now stored under :
- include/haproxy for the generic includes
- include/types.h for the structures needed within prototypes
- include/proto.h for function prototypes and inline functions
- src/*.c for the C files
Most include files are now covered by LGPL. A last move still needs
to be done to put inline functions under GPL and not LGPL.
Version has been set to 1.3.0 in the code but some control still
needs to be done before releasing.
